The official Snip, Burn, Solder, Shred book launch party is December 3 from 6 to 8pm at the Workantile Exchange (118 S. Main St., Ann Arbor, MI, 48104)

This is the wire you'll use to make the pickup for the $10 Electric Guitar (Project 13). Each card has one continues length of pickup winding wire in two 135-foot coils. You'll have enough wire to 1) screw up once and still be able to build a working pickup, 2) make a single pickup with twice as many windings as the one described in the book (and thus a "hotter" signal), or 3) make two separate pickups.

Price includes shipping, handling, and PayPal fees.

How many?

1 card $3.00 2 cards (can make 4 pickups) $5.00 3 cards (can make 6 pickups) $7.00

Posted by dave-o at 01:55 PM | Permalink

YouTube - Thunderdrum--"Snip, Burn, Solder, Shred" Book Demo

Posted by dave-o at 11:45 AM | Permalink

This PDF includes templates for three boomerangs: a scaled down version of the quad-blade fast-catch boomerang in Snip, Burn, Solder, Shred, plus two new tri-bladers). Each fits on a single sheet of standard 8.5-by-11 paper (and, as a bonus, each of these designs scales pretty well; if you have access to a printer that can handle bigger paper, then you can scale these up and make bigger boomerangs).

To use the Print-n-Snip Boomerang Template:

1. Print out the boomerang that catches your eye (slightly heavier paper--like resume stock--makes for a slightly easier to trace template)
2. Trace the design onto light-weight cardboard (such as poster board, a cereal box, a Krispy Kreme donut box, etc.)
3. Carefully cut it out
4. Crimp the quarter-line on each blade (as described in step 7 of Project 18 in the book)
5. Tune and throw!

If you come up with a boomerang design you like and want to add it to the template, drop me a line! (My email is in the "About the Author" box.)

Posted by dave-o at 03:26 PM | Permalink

If you have a little soldering experience--including building any of the electonics projects in Snip, Burn, Solder, Shred--then you're ready for T. Escobedo's "Circuit Snippets." This document includes several dozen sound circuits (largely guitar effects, although they work with any sort of instrument you can plug into an amp), which range from the relatively common (e.g., distortion pedals, phasers, envelope followers, pre-amps, auto-wahs) to uncategorizable strangenesses. In terms of quality, many of these sound as good as mass-market stompboxes at one-tenth the price.

(The Synthstick entry has a bit more about Escobedo's FolkUrban website, but the short story is that it was really cool, had lots of great designs for different instruments, and disappeared with GeoCities in October 2009. I saved PDFs of "Circuit Snippets" and the Synthstick, but many other Escobedo fans have done a much better job of archiving than I did, scooping up all of the audio samples, too. The "Circuit Snippets" mirror at Guitar HQ UK is one such faithful recreation of the old GeoCities page.)

"Circuit Snippets" by T. Escobedo

Posted by dave-o at 02:56 PM | Permalink

For years, Tim Escobedo maintained the excellent FolkUrban website, which featured a wide array of instruments--both traditional and electronic--cunningly made from cheap, common supplies (lots of PVC and tupperware, grocery sacks, etc.) His projects were a huge influence, and served as invaluable templates to my tinkering; the synthstick was the first synth I ever built, and its VCO (the core noise-making circuit) found its way into many of my projects, as well as those built by my students (sharp eyes will see something very similar nestled at the heart of the Cigar Box Synth, Project 17).

GeoCities evaporated in October 2009, and Escobedo's entire site with it. I archived the Synthstick and his collection of Circuit Snippets as PDFs, but these don't include any of the audio examples. Happily, I've discovered that many other tinkerers loved Escobedo's site as much as I did, and archived various chunks; Googling for "T. Escobedo" is a good place to start.

"The Synthstick" by T. Escobedo

Posted by dave-o at 02:47 PM | Permalink

For years, Steven L. Sachs maintained a great page on didgeridoos. It largely concerned making PVC didges like the Electro-Didgeridoo (Project 11 in the book), but also offered info on modifying lower-cost store-bought bamboo and teak didges into instruments that, sonically, could often pass for their genuine (and expensive) eucalyptus cousins. When GeoCities folded in October 2009, it took Steven's site with it. I've archived a PDF of his page, and humbly offer it here:

"Making PVC Didgeridoos" by Steven L. Sachs

Posted by dave-o at 02:33 PM | Permalink

YouTube - Quick-n-Easy Water Rocket--"Snip, Burn, Solder, Shred" Book Trailer 1

Posted by dave-o at 09:23 AM | Permalink

Yfrog Photo : yfrog.com/5572laj - Shared by narcosislabs

Sew your own with this free sample project from Snip, Burn, Solder, Shred (the Cthulhu mod is at the end of the project; mine is pictured below).

Posted by dave-o at 03:58 PM | Permalink

No Starch Press and Malloy (the printer, right here in Ann Arbor, Michigan) have made a superawesome book out of the jumbled mess of ill-lit pics and typos I produced--and you can order it directly from the publisher at a 35% discount with this coupon code: MAKEMORE (good until the end of December).

Posted by dave-o at 10:59 AM | Permalink

A nifty lil digital multimeter kit from the MakerSHED for just 19 bucks. (Lots of other cool, affordable, entry-level kits for the solderer in your life, including a sweet little Simon game, too.)

Multimeter Kit

Posted by dave-o at 01:56 PM | Permalink

The Things He Carried - Magazine - The Atlantic

Posted by dave-o at 04:42 PM | Permalink

YouTube - 20100731-Ignite-MakerFaireDetroit-08-DavidErikNelson-Writing

The first few words of my talk were cut off; they were: "My name is David Erik Nelson, and I make my living by writing."

Posted by dave-o at 08:39 PM | Permalink

 

FREE SAMPLE:
Project 3: the Sock Squid

Pre-order Snip, Burn, Solder, Shred from Amazon or directly from the publisher, No Starch Press.

Posted by dave-o at 12:42 PM | Permalink