« "Circuit Snippets" by T. Escobedo | Main | 42 gauge pickup winding wire »

Print-n-Snip Boomerang Template

boomerangs-sm.png

This PDF includes templates for three boomerangs: a scaled down version of the quad-blade fast-catch boomerang in Snip, Burn, Solder, Shred, plus two new tri-bladers). Each fits on a single sheet of standard 8.5-by-11 paper (and, as a bonus, each of these designs scales pretty well; if you have access to a printer that can handle bigger paper, then you can scale these up and make bigger boomerangs).


To use the Print-n-Snip Boomerang Template:

  1. Print out the boomerang that catches your eye (slightly heavier paper--like resume stock--makes for a slightly easier to trace template)
  2. Trace the design onto light-weight cardboard (such as poster board, a cereal box, a Krispy Kreme donut box, etc.)
  3. Carefully cut it out
  4. Crimp the quarter-line on each blade (as described in step 7 of Project 18 in the book)
  5. Tune and throw!

If you come up with a boomerang design you like and want to add it to the template, drop me a line! (My email is in the "About the Author" box.)

Connect

About the Author


David Erik Nelson is an award-winning science-fiction author and essayist. His fiction has appeared in Asimov's, The Best of Lady Churchill's Rosebud Wristlet, and Steampunk II: Steampunk Reloaded.

  • Find him online at www.davideriknelson.com
  • Follow him on Twitter: @SquiDaveo
  • Stay in touch
  • Contact: dave[AT]davideriknelson[DOT]com
  • Shop


    Make cool things (water rockets, cardboard boomerangs, a $10 electric guitar, a sock squid, etc.) while learning cool skills (basic soldering, sewing, carpentry, woodburning, etc.), and do it all on the cheap (most projects are under $10, many supplies are *FREE*).
  • Reviews, samples, and full table of contents: Snip, Burn, Solder, Shred
  • Kits and Supplies

     

  • Tip Jar

    Powered by
    Movable Type 3.2